For your 2022 Lance 850 truck camper that measures 18 feet in length the best option for a cover is the Camco Ultraguard part # CAM45770 which provides the best protection in hot and dusty climates and also is easier to fit and install. view full answer...
Most people when using the A7735 Tork Lift Extended Power Battery Mount # TLA7735 they would charge them for the vehicle's 7-way 12 volt accessory circuit. Which this is the pin in the 1:00 position so you'd need to run a length of 10 gauge wire like part # 10-1-1 from this pin to the positive post of both batteries to put a maintenance charge on them. view full answer...
While we don't know for sure if the SnapPad Mini Jack Pads part # SN39FR will fit your 2019 Lance Model 1062 if you can measure the feet of your jacks now it should be pretty easy to figure out. If your feet are 5-1/2 inches square these will work. If you have a different size let me know or check out the attached link to see all of the options we have where you can select your foot size from the drop down menu. view full answer...
If you select "keyed alike" from the drop down menu on the product page for the etrailer coupler lock part # e98887 and order more than one lock they will all use the same key. view full answer...
You'll want a heavy-duty cover for your 2017 Lance 975 truck camper to withstand the soggy winter weather, and the best option that fits your camper is from Camco:
- Camco UltraGuard Slide-In Camper Cover - 19-1/2' Long # CAM45773
The UltraGuard # CAM45773 is designed to withstand a great deal of moisture, be it rain or snow, due to its top being triple-layered. It is also vented so that the wind can pass through without added stress on the cover, and it has adjustable hold down straps... view full answer...
Thanks for reaching out about this product.
The Camco UltraGuard Slide-In Camper Cover - 16-1/2' Long # CAM45771 does have integrated zippers to help you access your truck camper.
However they are on the corners and, to me, seem to be more of a hassle.
I would recommend the Adco SFS AquaShed Truck Camper Cover - 16' Long - Gray # 290-12262. It has an easier way to access the back door and they are higher quality.
That said they are still made of fabric and no matter what you decide... view full answer...
The Replacement Jack Crank Hub Cap for HappiJac Camper Jack System # LC34HD that you referenced is sold individually. If you needed 4 you'd need to order a quantity of 4. view full answer...
For a better cover than the Camco UltraGuard Slide-In Camper Cover # CAM45773 you originally purchased, I recommend the following for your 19' 2018 Lance 975 Truck Camper:
- Classic Accessories PolyPro III Deluxe RV Cover # CA80037
This cover is backed by a 3-year warranty as opposed to the 2-year from Camco, which goes to show the confidence Classic Accessories places in their product. It's also important to note that all storage covers tend to be a sort of fragile so it's good to put... view full answer...
We have the Swagman Roamer LT camper shell roof rack part # S80510 which would work great on your Lance 855S camper but this is a universal style roof rack that would require drilling. We don't have anything custom fit for your camper at this time. view full answer...
What's the entry height of your Lance? I am sure we have a set of the Torklift Glowsteps that will work but we need to know for sure the entry height to pick out right size. For example, the part # TLA7844 fits the height range of 31-42 inches.
And the part # TLA7845 fits the height range of 38-1/2" - 50". view full answer...